Ping Anser #1 Putter

PING Anser #1 Putter

The stunning PING Anser Putter has reinvented itself, with slight variations to the top lines, toe radius and heel-toe length, giving you a great roll on the greens every time.

The PING Anser Putter is very appealing and not only looks great, but sits well over the ball. The satin nickel finish design is complimented with crafted milling lines on the heel and toe ballasts to reduce glare when playing golf in the sunshine.

Price: approx. £200

Epon Limited Edition i33 Putter (only 100 pieces worldwide)


This forged putter was made in the Far East from premium Japan Industry Standard S20C Steel and is precision CNC Milled to perfection.

This is supplied with an original i33 Epon head cover. The 34″ stock golf shaft is the Shimada 121-P 120g heavy putter shaft.

Price: approx.£500

Miura “Series 1957” Classic Putter

miura mp series 57

This new Miura “Series 1957” Classic design putter is subject to the same forging process as Miura Irons.

The Miura putter is designed with an oiled chrome finish which very much compliments its soft visual features.

This premier toe weighted off set classic golf putter comes in two weights, 350gms and 370gms.

The milled putter face matches looks with actual golf putting performance.

This Miura putter is extremely forgiving and produces a ball strike which transmits to the feel, distance control and in achieving the truest of rolls from reduced skid.

(Models MP 005 – 350, MP 006 – 370)

Price: approx. £260

Yamada’s Musashi Putter

yamada putter

Yamada’s Musashi putter is a traditional plumber neck design superbly milled from the finest carbon steel.

This tour putter has a headweight of 365 grams and is balanced with the benefit of rounded soft lines to assist alignment.

The white centre line sets this tour putter up to make it easier to hole more putts.

The Musashi has the unique feel you only get with a genuine limited edition handmade Yamada putter and is available in Smoked, a charcoal style finish.

This Yamada Putter has a raw finish and is popular with golfers that are looking for a tour putter with less glare.

Available in recommended lengths of 31″ – 36″, with 34″ being the standard length.

This Yamada putter is finished-off with either a Yamada, Iomic, Gripmaster Lambskin or Deerskin Putter Grip.

Price: approx. £460

Piretti Cottonwood II Putter – Black PVD


The Cottonwood II from Piretti is a blade style putter precision milled from a solid billet of 11L17 carbon steel.

The Cottonwood II weighs 365 grams, has a 4:00 toe hang and lower center of gravity (cog), which promotes a better, truer roll.

The Cottonwood II is slightly offset which promotes the left hand being square at address and has a Midnight Black Finish.

The finish is maintenance and glare free.

All Piretti Putters come with a matching golf headcover.

Price: approx. £260

Seemore DB4 CS Putter

Seemore DB4 CS Putter

The SeeMore DB4 Putter is 100% precision milled carbon steel with a proprietary multi-layer black satin finish for striking and lasting beauty.

SeeMore’s RST2 technology offers the key benefits of RifleScope Technology (RST) in a classic hosel style blade.

The RST2 alignment system is housed on the top of the hosel vs. the original RST system which is found on the top heel section of the putter.

The 2 white lines on top of the hosel are milled perfectly parallel to the face of the putter, creating a perfect “gun sight” effect where the golfer is assured of being square to the intended target line when the white lines are visible and the signature red dot is hidden.

If the red dot becomes visible at address, then the golf putter face is either open or closed, or the loft is not optimal.

All SeeMore putters feature a proprietary 2-tone chrome shaft with an 8 inch black satin section at the bottom, a visible and integral part of SeeMore’s alignment system.

The putter head weights approximately 320-325 grams and this is offered in 32″-35″ lengths, with 34″ being standard.

Price: approx. £240

Whitlam Tour Issue Putter


Whitlam putters are a blend of classic models with a twist of today’s moderntechnology.

Whitlam putters are CNC milled in America from a solid billet of 303 stainless steel and mild carbon steel.

After milling, each Whitlam golf putter goes through a 15 step finishing process that gives them the exquisite quality expected in Whitlam putters.

The Whitlam Tour Issue putter is a limited run that has the beautifully subtle brick pattern design.

There are three different ballpocket designs available: The USA colored rings, the solid red circles, and the red rings.

There are approximately 20 in each style.

Price: approx. £300

Bettinardi Queen B Model 5 Putter

Bettinardi Queen B Model 5

The Bettinardi Queen B Model 5 has a traditional style look with a little bit more of a wide body.

The Bettinardi Queen B Model 5 has a shallower face with a thicker profile so it looks and feels stable at address.

The Micro Honeycomb putter face maintains the flatness of classic honeycomb pattern.

Bettinardi can decrease the diameter of the honeycomb pattern; resulting in an elegant prism affect that compliments the Cashmere PVD finish.

This golf putter from Bettinardi can be cut to length and bent to specs.

Price: approx. £300

Rife Aruba Putter


This classic Anser style golf putter introduced originally back in the 1960’s was used to win the 2010 WGC Accenture Match Play Championship.

The new “Aruba” features Rife’s trademark vertical alignment notch and patented RollGroove face technology that produces a quicker roll and a softer feel.

The Aruba putter also features a plumber’s neck creating a full shaft offset and slight toe down balance. As with all Rife Golf Putters the Aruba is milled and made of mild 303 stainless steel. This golf putter comes with a headcover.

Price: approx. £150


Graham J Gordon, The Editor and Owner, GolfblogspotUK

The GolfblogspotUK website is owned and run by former Walker Cup player and European Tour card holder, Graham J Gordon, from Scotland, the Home of Golf. The owner is a golf fanatic who had to retire early from competitive tour play due to a back injury that required surgery. Graham wishes to share his knowledge and own experiences of the game with the GolfblogspotUK community and to receive your feedback on all aspects of the sport. Graham has been playing the game for over 20 years and received a great deal of pleasure from the sport. He has met several friends and visited many different places around the world, thanks to playing the great game of golf. Time to put a little back into the game to help others.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>